boom pole shock mount
Suitable for mics of 21mm diameter, up to 210mm in length weighing no more than 120 grams. Lights, cameras, phones and more — prop your gear at any angle, within arm’s reach or beyond the usual. There is only one Rycote®| Look for the Rycote logo. Mount only: 105mm (w) x 105mm (l) x 175mm (h). It's universal design allows it to accept almost any mic from handhelds to shotguns. Forged from steel and crafted for content creators, Multi Mount is a modular rigging system that lets you mix components to match your workflow. It allows the boompole holder … 419 Mt. InVision Broadcast & Film Suspensions provide unparalleled protection against shock, vibration, and handling noise for miniature, probe, handheld, and shotgun microphones. We have boom poles that are available in a variety sizes. Supplied with a lightweight Pistol-grip handle for handheld applications, this flexible system is has a 3/8” thread fitting for boom-pole mounting. Short shotgun microphones (21mm diameter; up to 210mm in length). With several models designed for use with a vast number of microphone makes and models, InVision Broadcast & Film suspensions provide outstanding shock and handling isolation performance with microphones mounted to boom poles, as well as floor, desk, and suspended stands. Suitable for mics of 19mm diameter, up to 210mm in length, weighing no more than 120 grams. Suitable for DPA 4017B and 4017C, Sanken CS-1e and Sennheiser MKH 8060. The INV-7HG MKIII is one of our most popular InVision Broadcast & Film shock mounts. The tips also fit a variety of pro audio grips and mic suspensions that include shock and lyre mounts for cradling mics to reduce their vibration and noise. The pole weighs in at an amazing 1 pound! The poles have threaded tips, most with a standard size of 3/8-inch, to directly secure mics. Nebo Road Pickup time is Monday-Friday 2:00 pm-4:30 pm the day before your rental starts. Supplied with integrated cable clamp for cable-borne noise reduction. Suitable for Schoeps MiniCMIT. 75mm (w) x 170mm (h).Suitable for Schoeps MiniCMIT. The shock mount boasts high mechanical isolation from the end of the boom pole, significantly reducing noise and producing a better audio quality on set. Drop us a line using this form and we'll be in-touch asap. 2 x 9.5mm clips with 70mm wide Lyre, and a reducing sleeve, mounted with 25mm (1") centres, Compact condenser, accommodates windscreen, 1 x 20mm front clip, 1 x 9.5mm rear clip, with 70mm wide Lyre, standard bar with 25mm (1") centres, 2 x 19-25mm universal clips, with 70mm wide Lyre, mounted with 25mm (1") centres, Short condenser (Max. It's up to you. The "Dual-stage" shock mount has two separate sets of shock absorbing bands to hold the mic in place which keeps the microphone well isolated. Each Kit contains the correct sized INV-Lite shock-mount, appropriate for the Softie-Lite chosen. 10 Foot Carbon Fiber Telescoping Microphone Boom Pole Arm Extension Stick Holder Pittsburgh, PA 15237, © 2019 Meyer investment group AVSLED / Around Back Restaurant & Bar / Two-Eight Printing. With the Duo-Lyre providing support for slip-on windshields including the Super-Softie, Classic-Softie, and BBG Windshield, this flexible, robust, cost-effective shock mount is built to withstand modern day ENG and location recording. Rental needs to be returned by 10 am the day after your rental. 120mm), supports slip-on windshield, 2 x 19-25mm universal clips, with 70mm wide Lyre, long bar with 70mm (2.75") centres, Short and medium condenser, short shotgun, Suitable for Microphones from 19 to 34mm in diameter, Short and medium condenser, short shotgun, supports slip-on windshield, 2 x 30mm clips, with 70mm wide Lyre, mounted with 70mm (2.75") centres, 1 x 30mm front clip, 1 x 19-25mm rear clip , with 70mm wide Lyre, mounted with 70mm (2.75") centres, Suitable for Microphones from 19 to 34mm in diameter, Max weight: 500 grams, Max Length: 50cm, Short shotgun microphones (19mm diameter - up to 210mm length), Short shotgun microphones (21mm diameter - up to 210mm length). Short shotgun microphones (19mm diameter; up to 210mm in length). If your rental requires prep time in the VPS Shop, please schedule time when booking your equipment. Supplied with a lightweight Pistol-grip handle for handheld applications, this flexible system is has a 3/8” thread fitting for boom-pole mounting. Our 8’ Boom pole & shockmount comes with a unique feature which differentiates it from conventional straight poles, the quick-interlocking articulating joint. Utilising Rycote’s exclusive Lyre technology, these virtually unbreakable shock-mounts are designed with an integral cable clamp to isolate the microphone from cable and stand-borne noise. The Shockmount features a four-point suspension holding poles and mics that measure 0.74-0.98″ (19-25mm) in diameter. The Rode Blimp uses Rycote’s impressive Lyre technology and is commonly used with a boom pole. 75mm (w) x 170mm (h).Suitable for DPA 4017Band4017C, Sanken CS-1e and SennheiserMKH 8060. Suitable for 19-34mm diameter mics, the incorporated Duo-Lyre shock mount has a special ‘soft’ grip moulded into the clip. Copyright © Rycote Microphone Windshields Ltd. All rights reserved. Microphones, stands, cables and windshields/foams shown for illustration purposes only and not included with shock-mounts. The Shockmount features a four-point suspension holding poles and mics that measure 0.74-0.98″ (19-25mm) in diameter. Suitable for microphones from 19-34mm in diameter, the InVision-6 Soft uses the extremely robust patented Rycote Lyre® 62 Shore shock mounts system to provide massive reduction handling noise. We will provide you with a custom code to access the lockbox. The shock mount has good compatibility with most standard shotgun mics with 19mm to 22 mm diameter. Rycote has designed the INV-6 HEAVY and INV-7HG MKIII shock mounts for use with slip-on windshields. Suitable for microphones from 19-34mm in diameter, the InVision Softie Lyre Mount uses the Lyre system to provide complete isolation against handling and cable-borne noises. What's Included This boom pole has three telescopic sections and features two padded hand grips. For after business hours or weekend returns, we have a secure lockbox. We have boom poles that are available in a variety sizes. Two versions of the Softie-Lite Kit are available; a 19mm and a 21mm variant. k-tek boom pole with shock mount features The K-Tek KE144 Aluminum Boom Pole is designed to meet the needs of ENG and DV Camera crews. This securely holds the microphone, preventing any slippage or twisting and providing the necessary stability for slip-on windshields and front-heavy microphones. This allows you to bend and adjust the position of the boom pole which ensures that it is hidden in the final shot and view of the camera. Ideal for use with Super-Softie, Classic-Softie and BBG Windshield models, these robust shock mounts provide excellent isolation for boom pole and stand mounting applications. With the Duo-Lyre providing support for slip-on windshields including the Super-Softie, Classic-Softie, and BBG Windshield, this flexible, robust, cost-effective shock mount is built to withstand modern day ENG and location recording.
Best Pastry Recipes, Dell Latitude I5 8gb Ram | 1tb Hdd, Building Muscle After 40 Male, Morningstar Maple Sausage Patties Review, Made A Way Travis Greene Lyrics, Remote Rn Jobs No Experience, Hollywood Park, Mikel Jollett, Bus Reservation System Project Source Code In Java, Tornado Plane Sonic,